SIB K1201 Access Control Stand-Alone Proximity Reader and Keypad

SIB K1201 Access Control Stand-Alone Proximity Reader and Keypad

Compare
  • Indoor use, bubble buttons keypad
  • Plastic case
  • Full programming from the keypad
  • 2000 users, supports Card, PIN, Card + PIN
  • Can be used as a stand alone keypad
  • Can set standalone access control mode, toggle relay mode, reader mode
  • With data transconductance function
  • Adjustable Door Output time
  • Very low power consumption (30mA)
  • Fast operating speed, <20ms with 2000 users
  • Lock output current short circuit protection
  • Easy to install and program
  • Built in buzzer
  • Red, Yellow and Green LEDS display the working status

20.00د.ا

 

2. Specifications 

Operating Voltage DC 12V±10%
User Capacity 2000
Card Reading Distance 3-6 cm
Active Current ＜60mA
Idle Current 25±5 mA
Lock Output Load Max 3A
Alarm Output Load Max 20A
Operating Temperature -45℃～60℃
Operating Humidity 10%- 90% RH
Waterproof Conforms to IP68
Adjustable Door Relay time 0 -99 seconds
Adjustable Alarm Time 0- 3 minutes
Wiegand Interface Wiegand 26 bit
Wiring Connections Electric Lock, Exit Button, External Alarm,External reader

3. Installation

Remove the back cover from the keypad using the supplied special screw driver

Drill 2 holes on the wall for the Self tapping screws and I hole for the cable

Put the supplied rubber bungs to into the two holes

Fix the back cover firmly on the wall with 2 Self tapping screws

Thread the cable through the cable hole Attach the keypad to the back cover.

4. Wiring

Colour Function Description

Pink

BELL_A

Doorbell button one end

Pink

BELL_B

Doorbell button to the other end

Green

D0

WG output D0

White

D1

WG output D1

Yellow

OPEN

Exit button one end(the other end connected GND)

Red

12V+

12V + DC Regulated Power Input

Black

GND

12V – DC Regulated Power Input

Blue

NO

Relay normally-on end(Connect positive electric lock “-“)

Purple

COM

Relay Public end, connect GND

Orange

NC

Relay Closed end(connect negative electric lock”-“)

5. Diagram

Common Power Supply 

Special Power Supply

Reader Mode

6. Packing 

  • 0.16kg/pc
  • 100pcs/ctn, 17kgs/ctn
  • Outside carton dimension: 57.5*47.5*23.7cm

 

التصنيف: العلامة التجارية:

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “SIB K1201 Access Control Stand-Alone Proximity Reader and Keypad”

There are no reviews yet.

منتجات ذات صلة

Select at least 2 products
to compare